CP
(Convenience Panel)

• Suitable for NEMA 12, where dust & oil mists are a concern
• Metal cover and mounting plate
• Requires less than 53 square inches of panel space
• Unit is TOUCH SAFE, by enclosing the duplex or GFI
• Comes with circuit breaker protection
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

CR
(Convenience
Receptacle)

• Suitable for NEMA 12, where dust & oil mists are a concern
• Metal cover and mounting plate
• Requires less than 36 square inches of panel space
• Unit is TOUCH SAFE, by enclosing the duplex or GFI
• E-Z installation using standard 4" square wireway knock-out
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

PP
(Program Port)

• Suitable for NEMA 12, where dust & oil mists are a concern
• Metal cover construction
• Requires less than 12 square inches of panel space
• Can be ordered with with or without 115v power
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

M1
(Modular 1 gang)

• Suitable for NEMA 4 & 12, where dust, oil mists, and wash downs are a concern
• Modular construction with interchangeable components and covers
• Plastic construction with Clear Cover
• Requires less than 12 square inches of panel space
• Can be ordered with 115/250v power
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

M2
(Modular 2 gang)

• Suitable for NEMA 4 & 12, where dust, oil mists, and wash downs are a concern
• Modular construction with interchangeable components and covers
• Plastic construction with Clear Cover
• Requires less than 21 square inches of panel space
• Can be ordered with 115/250v power
• Can be ordered with or without circuit breaker protection
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

M3
(Modular 3 gang)

• Suitable for NEMA 4 & 12, where dust, oil mists, and wash downs are a concern
• Modular construction with interchangeable components and covers
• Plastic construction with Clear Cover
• Requires less than 31 square inches of panel space
• Can be ordered with 115/250v power
• Can be ordered with or without circuit breaker protection
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

32
(size 32 pin
housing)

• Suitable for NEMA 4, where wash downs are a concern
• Metal cover construction
• Requires less than 18 square inches of panel space
• Can be ordered with or without 115V power
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

24
(size 24 pin
housing)

• Suitable for NEMA 4, where wash downs are a concern
• Metal cover construction
• Requires less than 14 square inches of panel space
• Can be ordered with or without 115V power
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

16
(size 16 pin
housing)

• Suitable for NEMA 4, where wash downs are a concern
• Metal cover construction
• Requires less than 18 square inches of panel space
• Can be ordered with or without 115V power
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

10
(size 10 pin
housing)

• Suitable for NEMA 4, where wash downs are a concern
• Metal cover construction
• Requires less than 10 square inches of panel space
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

6
(size 6 pin
housing)

• Suitable for NEMA 4, where wash downs are a concern
• Metal cover construction
• Requires less than 18 square inches of panel space
• Can be ordered with or without 115V power
• Attaches directly to the program port of most CNC or PLC processors, allowing programming access from outside of enclosure
• All mounting hardware provided

Special
(Custom Products)

Since there are so many possible configurations that we can manufacture, please give us a call or use the online "Request a Quote" page for the particular requirements that you are in need of.